Premium High-Efficiency Diffuser For outdoor Pond & Lake Aeration MADE IN USA by US Solar Mounts

The DB36 is a durable, 100% American-Made pond air diffuser.
Using High-Effieciency aeration tubing, these diffusers offer higher float rates with lower back-pressure.
Reduces system wear and extends compressor life.
Use them to make stronger the effectiveness of any aeration system.

Features:
13″ Ring Diameter / 36″ of Aeration Tubing
Built-in Check Valve
Stainless Steel Strain-relief clamp for 3/8″ or 1/2″ air line.
Includes Hose barbs for 3/8″ and 1/2″ air line.
100% Stainless Steel Base is Completely Corrosion Resistant.
Built-In Deal with and Rope Tie-Off for Easy Deployment.
Stainless base has NO SHARP EDGES.
Effective at any Water Depth. Easy to scrub and very low maintenance.
Produces FINE, 2-3mm bubbles for Increased Diffusion Rates.
600 GPM float rate for with ONLY 2 CFM!
Works with ANY brand of compressor
Suitable to be used in Fresh Water, Salt Water, Brackish Water, FRAC Tanks.
Requires 1.5CFM to 6CFM air float. Max Pressure: 50PSI.

100% MADE IN the us
Compatible with any AERATOR, COMPRESSOR or WINDMILL. Wish to Replace a Membrane-Style Diffuser? This Diffuser Will Increase Your Oxygen Transfer, Increase Lift In the course of the Water Column, and is a Durable, Long-Lasting Replacement for Any Air Stone or Membrane Diffuser.
Stainless Steel base is rugged and self-sinking. Integrated Deal with and rope tie-off for Easy Installation.
Works with ANY BRAND of Compressor / Windmill that produces 1-10 CFM. Accepts 3/8″ or 1/2″ air line. Check-Valve and Hose Strain Relief Clamp are included.
Adding diffused aeration on your pond helps removes odors and encourages decomposition of organic sediment(muck).
Compatible with all Windmill Aerators. Replaces Airstones.